ATC Tutorial

INFINITE FLIGHT ATC
Infinite Flight uses a Unicom ATC system, where there is no air traffic controller but aircrafts announcing there positions. To work the system, there is an atc button, which pops up with many options to send to your current frequency.
Most of this are mainly straight forward, like taxiing and taking off. Which runway are you on? There are two ways of finding out. You can zoom very in on the map and the runway number would show up, or you can look at the start of the runway, which shows the runway number also (you must turn on runway numbers in settings).
When sending a transmission, make sure you are tuned on the right frequency.
Taking off transmission options: Remaining in the pattern, north south east west, straight out.
What does remaining in the pattern mean?
It means that you will fly in the traffic pattern, which I don't see exist in Infinite Flight Live. So I would choose the other options,
Reporting position:
Final, left base, left downwind etc
Final means you are on your final approach and is about to land on a runway in the airport. This advises other aircraft to hold short and wait for you to land.
Left base, left downind etc.: Using these transmissions aren't very helpful in multiplayer. I would not use these transmissions.
Announce inbound: This means you are going to approach the airport. Tapping this option gives runway numbers. Tap on the runway you would land on. This transmission gives other aircraft your position, and allows them to determine whether to take off or hold short.
Request traffic advisories: This means you are going to approach the airport for landing, and would like to see which runways are being used.
Send traffic advisories: This tells the other inbound aircrafts which runway you are using.
Go around: This means you have missed your approach and will take off for another shot. It gives other aircrafts opportunity to take off or land.
People usually use the ATC effectively, but that could be said otherwise at the airport KHAF.

Enjoy multiplayer! If you have any questions, feel free to leave a comment.




REAL WORLD AVIATION ATC

Phraseology
First, you need to know the radio-alphabet and numbers.

A lpha                          1 one
B ravo                          2 two
C harlie                         3 tree
D elta                           4 four
E cho                            5 five
F oxtrot                        6 six
G olf                             7 seven
H otel                           8 eight
I ndia                             9 niner
J uliet .
K ilo
L ima
M ike
N ovember
O scar
P apa
Q uebec
R omeo
S ierra
T ango
U niform
V ictor
W hisky
X ray
Y ankee
Z ulu

Decimal/point
118.80 One-one-eight decimal eight-zero

Callsign
All aircrafts has its own callsign. It is usually in a form of: Company name, flight number.
For example, Emirates 14 Heavy, Delta 19

The Basic Form of a Transmission
Who you are sending the transmission to, who you are, and message
Eg. Sydney Tower, United 170, ready for departure, holding short of runway 16L.

Requesting Clearance
Using the basic form of a transmission, here is the messages you say to request clearance for taxi, takeoff, and landing.
Taxi: Request taxi
Eg. Emirates 19, requesting taxi to runway ___.
Departure: Ready for departure, holding short of runway.
Eg. Emirates 19, ready for departure, holding short of runway 16 right.
Takeoff: Ready for takeoff
Eg. Emirates 19, ready for takeoff on runway 16 right.
Landing: Request clearance to land on runway ___.
Eg. Emirates 19, requesting clearance to land on runway 14 left.

Flight Level
Instead of saying 35 thousand feet, the term flight level is used instead. One flight level is 100 feet. So 35000 feet is flight level 350.
Eg. Emirates 1 Super, climbing through flight level 50, going for cruise altitude flight level 100.

Replying to transmissions
It is necessary to repeat the transmission sent by ATC to acknowledge that you received their transmission and understood it properly. 
For example, ATC says: Emirates 19, climb and maintain flight level niner thousand.
You would reply: Climb and maintain flight level niner thousand, emirates one niner.

Name of airports
Instead of saying, for example, YSSY, you would say: Yankee, sierra, sierra, yankee.

I think I have covered most of the stuff for ATC. If you have any questions, or info to add to this, please leave a comment down below.


35 comments:

  1. When you tell ATC/Unicom which taxiways you are going to use, you say it in order of which taxiways you are using. For example: "Emirates 140 at Terminal 3 ready to taxi 24L via Delta 8, Delta, Victor, holding point Victor." It is necessary to use the phraseology terms in any point of ATC communication. Also, do not say "to" instead of "via" as it is always understood as "two".

    ReplyDelete
  2. Some descriptions or definitions of the new IFLive ATC transmissions would be great. Examples; right base, remain in pattern, left traffic, advisories, etc etc etc...

    ReplyDelete
    Replies
    1. Yes, I have updated the tutorial for Infinite Flight Live.

      Delete
  3. Hi michael

    What do downwind and crosswind position mean?. I dont understand about it. Could you explain it?.
    When we aproach the runway. There are red and white triangle to help us where the runway is. What is the different between them.
    Thank you

    Regards
    Gie

    ReplyDelete
    Replies
    1. Hi Gie,
      In my opinion, you don't need to use the downwind position terms in ATC. But since you would like to know what it means, I'll look it up for you. I actually don't know as well, before you asked me.
      Upwind leg. A flight path parallel to and in the direction of the landing runway. This can be above the runway, as in a "low and over" or when practicing a "missed [instrument] approach," or offset to the upwind side as when inspecting the field prior to landing.
      Crosswind leg. A short climbing flight path at right angles to the departure end of the runway.
      Downwind leg. A long level flight path parallel to but in the opposite direction of the landing runway.
      Base leg. A short descending flight path at right angles to the approach end extended centerline of the landing runway.

      From what I can see, there is no red and white triangle to guide us. Can you be more specific please?

      -michael

      Delete
    2. Hi Michael

      Thank you for your explaination. I am sorry about slow response. I mean perhaps about ILS, some airport have red and white ILS, the other airport only have the white... what the different between them?. Thank you in advance

      Regards
      Gie

      Delete
    3. Hi gie
      I think you are referring to the glideslope lights next to the runway. They tell you if you are too high, too low, or on path.
      Two white: too high
      Two red: too low
      One red one green: a bit low
      Two greens: on path
      Hope this helps

      Delete
    4. Hi Michael,
      Just jumping in on this. I believe Gie may be referring to the Red lines or White lines guiding to the runway. I believe it is for the runways that have a glide slope. If it does, there will be a Red lines guiding to the runway and if there is not a glide slope, there will be White lines guiding to the runway. If I'm not mistaken I believe this is what Gie is referring to. Correct me if I'm wrong as far as what they are for.

      Brandon

      Delete
    5. Hi brandon,
      Can you please tell me what you are referring to?
      http://oi61.tinypic.com/11m6cyd.jpg

      Delete
    6. Michael
      I replied to the email but I didn't know how to attached a picture to this site

      Brandon

      Delete
    7. Hi Michael and Brandon,

      I am sorry, I couldnt explain it well. I think Brandon knows what I mean. I have printshooted the map. http://i58.tinypic.com/n50mwx.png
      On the map, before landing, runway 24 has red lines, and runway 06 has white lines. What the different between them?. Thanks Michael n Brandon

      Regards
      Gie

      Delete
    8. Hi gie
      Now I understand what you mean. The one that is in red is available to land on. The one thats is white means you cannot land there due to wind conditions. Of both runways are bail able, both would be red. I think these things are called landing paths, to guide you in and help flight planning.
      Help this helps.

      Delete
    9. *if both runways are available to land on, both would be red

      Delete
  4. I don't understand but i think it will work

    ReplyDelete
  5. The red always on that runway. Never changed I think. And there are many airport only have the white, both white (especially small airport). The international airport always have the white and the red

    Gie

    ReplyDelete
  6. Very good tutoriel ! I'm ready for infinite flight live , now !

    ReplyDelete
  7. I Cant help you , sorry ...

    ReplyDelete
  8. is there a radar screen for ??

    ReplyDelete
    Replies
    1. There is in the new Infinite Flight update. I will update the ATC tutorial tomorrow, stay tuned.

      Delete
  9. is there a radar screen for ??

    ReplyDelete
  10. What do we reply if atc ask for intention

    ReplyDelete
    Replies
    1. You tell them what you're intentions are.

      Delete
  11. What do we reply if atc ask for intention

    ReplyDelete
  12. how do you know if you are taking off north, south, west, or east?

    ReplyDelete
    Replies
    1. On top of the minimap in the HUF, it shows N or W, E, S.

      Delete
  13. What does departure and transition means?

    ReplyDelete
  14. What does departure and transition means?

    ReplyDelete
  15. Can anyone help me? What is the degree you intercept the locolizer on an ILS approach?

    ReplyDelete
    Replies
    1. MOST LOCALIZERS ARE INTERCEPTED AT ABOUT 2,500-4,000 FEET ABOVE AIRPORT. It's best to intercept at a 30 degree angle. Correct if I'm wrong anyone i'm and aspiring pilot

      Delete
  16. I can't see the act button. Is it only available on live?
    Thanks

    ReplyDelete
    Replies
    1. Correct.
      The atc function is only available on Infinite Flight Live.

      Delete
  17. If you are flying from east (at 90 degrees) and about to land to a runway straight in, Which runway should you inform ATC where you are about to land?
    runway 27 or 09? I once said inbound landing to airport___ and the ATC told me that I'm clear at runway 27, so i announced going around. And ATC told me to check help and to follow instruction.

    I assumed that by runway 27 he meant that I should touchdown at the runway with 27 on it. Is this right?

    ReplyDelete
    Replies
    1. Yes. You can also check with the mini map by zooming far in.

      Delete